|
|
 |
| The Firescan |
|
|
 |
Add your logo or customized graphic to your products or simply mark the alloy with this versatile, user friendly laser engraving system. Engrave the inside or outside of rings. Use the optional rotary attachment to do the complete diameter as well. You can use any font installed on the computer and go as deep as necessary. Compact, air cooled, and powerful enough to withstand final polishing. |
| |
Application: for permanent, durable, abrasion proof, and chemical resistant marking of metals and other materials. Used in production and retail shops as well. |
|
| Technical data |
| Laser Source |
Solid State Diode Pumped Nd:YAG |
| Wavelength |
1064 nm |
| Power |
5W-cw or 8W-cw or 12W-cw |
| Pumping principle |
Longitudinal |
| Pulse frequency |
0.1-75 kHz, Pulse energy @ 1 kHz: 3 mJ Integrated pilot: 650 nm / 3 mW |
| Laser Class |
4 with the (optional) protection housing Class 1 |
| Power Supply |
Integrated into the Laser source |
| Scanhead |
Galvo scanner: FireScan |
| Focusing optic |
F-Theta 163 |
| Scan speed |
<5 mm/sec. |
| Marking area |
110 x 110 |
| PC Interfaces |
Serial: RS 232C (3) Serial USB (1) |
| System Requirements |
Pentium IV, Windows 98/2K/NT/XP, 512 RAM |
| Fume Extraction |
optional (external) |
| Cooling |
Air only. No water supply necessary |
| Environment |
Temp: 15 ° C - 35° C / Humidity: 30-85% non-condensing |
| Size (L*W*H) |
Laser source incl. Scanner: 583*181*220 mm |
| Weight |
18 kg (Laser device only) |
| Electrical Connection and Consumption |
85-260 VAC / 50-60 Hz, 16A
Power Absorption (med.): 200 W
Power Absorption (max.): 400 W |
|
|
|
|
